Hi-Z S-9 Signal Source
This self contained oscillator was developed to help trouble shoot and verify that complex multiple element receiving arrays were working properly. It can be connected directly to 50 or 75 ohm coax systems or it can be connected to a Hi-Z Antenna (tm) system. One need only to switch the mode switch for either mode. This unit operates from the power of a 9 volt battery. The Led power indicator is designed to extinguish when the battery voltage drops below levels adequate for a fixed output signal. With this unit one simply needs to connect it to each antenna or signal path in a multi-element array while measuring controller output to verify all array elements are working.
Powered by a common 9 Volt battery.
On-Off Toggle switch
Quality G-10 fiberglass circuit board
Voltage sensing Power LED
3 1/4" X 2 1/8" X 1 3/8" package. Excluding battery clip
Screw type Stainless Steel RF output connections
