Hi-Z 2 Two Element Array System
Models:
Hi-Z 2 2 element, 2 direction system
Hi-Z 2-3 3 element, 4 direction system
Hi-Z 2 Shack Switch
OFF/ON Reverser Axis 90 Degrees
Specifications
· Maximum RDF 9.1db
· Directions 2 (Hi-2) or 4 (Hi-Z 2-3) 2-3 requires one more Hi-Z Amp
· Hi-Z 2 requires two verticals and is upgradeable to four directions – Hi-Z 2-4 (add one more vertical)
· Standard Hi-Z 2 system comes with a 4 direction shack switch, for ease in later upgrade to 4 direction Hi-Z 2-4
· Power Requirements 13.8 VDC, 4 conductor control cable (+13.8, GND, CTRL1, CTRL2)
· Delay cable can be ordered for either 40 or 50 foot element spacing
Pattern:
Components Supplied with the Hi-Z 2 or Hi-Z 2-3 Systems
1- Hi-Z 2 or Hi-Z 2-3 phase controller
1 – Hi-Z 2 shack switch (works for either 2 or 2-3
2 or 3 – Hi-Z Amps -- Hi-Z 2 =2 Hi-Z Amps, Hi-Z 2-3 = 3 Hi-Z Amps
1 – Hi-Z 75Ω In-line Pre-amp
1 – Hi-Z 75Ω to 50Ω Transformer
1 – 2 foot long RG6 cables (connect phase controller to in-line pre-amp)
1 – 2 foot long wire with terminals (power to Inline pre-amp)
ORDERING Info Click HERE
When ordering specify 40 foot element spacing or 50 foot spacing.
Phase Controller Hi-Z 2 Shack Switch
